Tag: post

how to use a farm jack to pull fence posts

No Comments

how to use a farm jack to pull fence posts插图

Best answer


Put a sturdy rock near the post Chain up the post as low as possible around the post Put the jackon top of the sturdy rock and secure the other end of the chain Now operate the jackand use a pair of gloves to get more pressure and secure your hand.

People also ask


  • How do you secure a fence Jack to a fence post?

  • Wrap a chain around the post. Wrap a 3 to 5 foot (0.9 to 1.5 m) length of chain several times around the post, as low to the ground as possible. Secure the chain to the jack. Place the jack on top of the block. Loop the chain tightly around the jack’s runner and secure it in place. Operate the jack.

  • How to pull a cemented fence post from the ground?

  • How to Pull a Cemented Fencepost from the Ground using a Car Jack. The first step is to remove the fence sections from the post so that you now have just the free-standing post. Now dig a shallow hole around the post. This hole must be deep enough to be able to see the top portion of the cement base of the post.

  • What kind of Jack do you use to pull wood posts?

  • I use brickeyee’s method above to pull a lot of wood posts that are set in concrete. The jack is known as a high lift jack or farm jack Just a heavy duty, overgrown bumper jack.

  • How do you remove a chain link fence post?

  • Put on a pair of heavy leather gloves and stand to the side of the jack’s handle. Operate the jack to lift the chain and gradually tug the fence post up and out of the ground. Did you know you can get expert answers for this article?

    Categories: Uncategorized

    Tags: , ,

    how to remove t post with farm jack

    No Comments

    how to remove t post with farm jack插图

    Best answer


    Dig out soil around the post. If the fence post has a large concrete base or is very firmly anchored in soil,you may need to use a farm jack (Hi-Lift jack) and chain to pull it out. To prepare for this,dig out the soil around the post to a depth of 1 to 1 feet (0.3 to 0.46 meters).

    People also ask


  • How do you hook up a Jack to a T post?

  • The working end of the jack handle is specifically designed to hook on to a t-post and will ratchet down the t-post when the jack handle is lifted and then lock into place when the handle is pushed downward, so you don’t have to continually reposition or reattach it once the once the post starts lifting out of the ground.

  • How do you pull up a T-post?

  • Raise the height of the fulcrum once the end of the plank touches the ground, and then try again.d then you can probably just pull it up with your hands. This can also be dangerous; T posts are kind of heavy, and they have some sharp edges. Be careful, and be sure to pull straight up. If it doesn’t want to move, wiggle it a little, then try again.

  • How to remove fence posts?

  • How to Remove Fence Posts 1 Assess the status of the fence post. 2 Dig a trench around the post using a shovel. 3 Soak the remaining soil. 4 Create a lever to help extract the post. 5 Attach the rope to the end of the board closest to the post. 6 … (more items) See More….

  • How do you secure a fence Jack to a fence post?

  • Wrap a chain around the post. Wrap a 3 to 5 foot (0.9 to 1.5 m) length of chain several times around the post, as low to the ground as possible. Secure the chain to the jack. Place the jack on top of the block. Loop the chain tightly around the jack’s runner and secure it in place. Operate the jack.

    Categories: Uncategorized

    Tags: , ,

    how to install a farm gate

    No Comments

    how to install a farm gate插图

    People also ask


  • How do you install an electric fence on an electric gate?

  • Also note the insulated wire, at right, running up the hinge post, carrying the electric fence’s charge underground across the gate’s opening. 1. A well-hung gate begins with well-set posts. The two fence posts on either side of the gate (the ‘hinge post’ and the ‘latch post’) MUST be set in concrete.

  • How to install a concrete gate post?

  • Set the second post the same way, paying close attention to the distance between the inner faces of the two posts. Then let the concrete set for a day or two before you hang the gate. When the concrete is set, finish filling the hole with dirt (or gravel, to keep mower-evading weeds away from the post) and tamp it down. 2.

  • Why choose farmfarm & rural gates?

  • Farm Rural Gates are an essential part of any fencing project and with our large range we make it a simple open and shut case. We鈥檝e got a range of farm gates to match all fencing types including steel tubular gates and palisade gates. We also supply hinges, brackets, and toppings to suit. Wire sizes from 5.0mm

  • How do you secure a gate to the ground?

  • Stretch a line across the length of location for the gate. Along that line, sink two hinge posts聙聰one for each gate. The 7-foot posts are round and treated all the way through with creosote. Here, they are buried 21/2 feet in the ground.

    Categories: Uncategorized

    Tags: , ,